Beginning in the 2009 edition of IRC (International Residential Code), there is a tension-tie requirement to meet prescriptive DCA 6-09 deck installation requirements for residential exterior decks. International Beams has released a new Technical Bulletin (TB-IJ-10) that provides guidelines on how to make this tension-tie connection to a floor system comprised of IB (International Beams) I-joists.

A PDF of the Technical Bulletin (TB-IJ-10), Connection of Exterior Deck to IB-Ijoist can be downloaded at:
http://www.internationalbeams.com/i-joists/technical-bulletins/

Architects, builders and design engineers can now get immediate access to International Beams updated I-Joist Floor Framing Details.

International Beams is pleased to announce that new framing details covering 20 specific framing situations are available as DWG, DXF and PDF files. To simplify the selection process, one can download either an individual DWG, DXF or PDF or a zip file containing a complete set of detailed drawings. There are separate files for the United States and Canada.

These details have been re-drafted and enhanced with additional information specific to IB.

The new files can be downloaded at :

http://www.internationalbeams.com/i-joists/details/

When adding web filler for 2-ply (double member) IB I-joists with 2×4 flanges, it can be less labor-intensive to use dimensional lumber rather than cut structural wood panel to depth. The new TB-IJ-9 provides an alternate to the structural wood panel filler indicated in the IB literature.

A PDF of the Technical Bulletin (TB-IJ-9), IB LVL Ledger Fastening can be viewed or downloaded at:

http://www.internationalbeams.com/i-joists/technical-bulletins

International Beams LVL (laminated veneer lumber) typically comes in 1 ¾” thicknesses and is suitable for use as ledgers to support floor (or roof) framing. For example, IB LVL may be used to support an intermediate floor at balloon-framed walls, or it may be used to support floor framing when poured concrete foundation walls extend above the floor level.

A PDF of the Technical Bulletin (TB-LVL-3), IB LVL Ledger Fastening can be viewed or downloaded at http://www.internationalbeams.com/laminated-veneer-lumber/technical-bulletins/

There are situations where architectural geometric restrictions of the cornice detailing require that the attic ceiling/floor joist be cut at a slope to match the sloped rafters. The bearing and shear capacity can be seriously compromised with this type of sloped-end cut on an I-Joist. International Beams has tested sloped-end cuts on IB I-joists. As a result of these APA-witnessed tests, we have established maximum end reactions for unreinforced and reinforced sloped-end cuts.

A PDF of the Technical Bulletin (TB-IJ-7), Sloped-End Cut IB I-Joists can be viewed or downloaded at http://www.internationalbeams.com/i-joists/technical-bulletins/

Technical bulletin IB-LVL-2, Multi-ply IB LVL Fastening, has now been updated to include design tables for ½” diameter thru-bolts and Simpson SDW screws in addition to the previous table for TrussLok screws.

A PDF of the Technical Bulletin (TB-LVL-2), Multi-ply IB LVL Fastening with TrussLok Screws can be viewed or downloaded at http://www.internationalbeams.com/laminated-veneer-lumber/technical-bulletins/

CCMC (the Canadian Construction Materials Centre) recently updated its Evaluation Report, #13507-R for International Beams laminated veneer lumber for use in Ontario.

The Evaluation Report issued January 5, 2011 indicates that International Beams LVL (manufactured under agreement with Murphy Company), when used as structural composite lumber (SCL) complies with the National Building Code 2005 and the standards of the Ontario Ministry of Municipal Affairs and Housing.

The full CCMC report can be viewed or downloaded at: http://www.internationalbeams.com/laminated-veneer-lumber/code-approvals/.

International Beams has prepared an LVL Design Manual for Canadian engineers, architects and contractors. It can be downloaded at: http://www.internationalbeams.com/laminated-veneer-lumber/literature-canada/.

For information on dealers selling International Beams LVL in your local area contact sales@internationalbeams.com, or call Toll Free: 1-866-457-4043.

Canadian builders, architects and design engineers welcomed the news that International Beams LVL is now available in Canada.

International Beams Laminated Veneer Lumber (LVL) is a premium quality structural product that is used for beam, header, joist and column applications.

The product made from laminated veneers of Douglas Fir, is available in thicknesses of 1½”, 1 ¾” and 3 ½” and widths ranging from 3 ½” to 24” and lengths up to 72 ft.

The manufacturing quality assurance program is third-party verified by APA – The Engineered Wood Association.

Manufactured under agreement with Murphy Company, International Beams LVL meets all Canadian Building Code requirements. The CCMC 13507-R report, (Canadian Construction Materials Centre) was issued Oct, 10, 2010 and can be downloaded from the International Beams website.

The IB Canadian Limit States Design LVL Design Manual is also available for download.

The product can be purchased from International Beams Canadian distributors.

Contact International Beams sales sales@internationalbeams.com, or call Toll Free: 1-866-457-4043 or your local IB distributor for information on purchasing IB LVL in Canada.

There are many builders, contractors and homeowners who are not yet aware of the
advantages and benefits International Beams I-Joists, LVL and Rimboard provide over
traditional lumber products.

International Beams Youtube Channel
http://www.youtube.com/user/Intbeams12
provides viewers with informative videos on the advantages of building with engineered
wood products.

Current topics covered include: PRI-400 Rating, I Joist Span Tables and I-Joists and<
Local Building Codes.

Additional videos, including FAQ videos will be added in the future.

International Beams announced today that it has released updates to its Technical
Bulletins for I Joists and Laminated Veneer Lumber.

A total of six Technical Bulletins for I Joists cover the following topics:

TB-IJ-1 Heading Off of Cut IB-I-Joists
TB-IJ-2 Outrigger O.H. Framing at IB I-Joists
TB-IJ-3 Load-Share Blocking/Bridging for International Beams I-Joists
TB-IJ-4 Brick-to-Grade Cantilever for IB I-Joists
TB-IJ-5 IB I-Joist Reinforcement at Offset Interior Bearings
TB-IJ-6 Fire Considerations for Residential Wood I-Joist Floors

The I Joist Technical Bulletins are available as individual downloadable PDF documents
or for convenience one downloadable .zip file containing all the documents at
http://www.internationalbeams.com/i-joists/technical-bulletins/
Two Technical Bulletins were also released for Laminated Veneer Lumber.